Could Car Ghost Immobiliser Be The Key For 2024's Challenges?
Car Ghost Immobiliser
Ghost Immobiliser is a sophisticated system that stops your car from starting if it does not have an exclusive pin code sequence that is entered through existing buttons (such as those on the steering wheel or dashboard). The device is inaccessible to thieves and operates in a silent manner.
It could help deter hotwiring as well as newer methods like relay thefts. local ghost immobiliser installer www.g28carkeys.co.uk could also result in a reduction in your insurance cost.
No Radio Frequencies
A ghost immobiliser differs from a standard one in that it doesn't transmit radio frequency, making it impossible for thieves to get around the device by using a low-cost key cloning device. This means that a ghost immobiliser will keep your car from getting started even if a thief has succeeded in cloning your key or stolen it.
Ghost immobilisers can also be used to stop relay attacks. They involve amplifying the signal from your key fob to trick the system into allowing your vehicle to start. The Ghost can recognise this and will refuse to start your vehicle, requiring you to input the PIN code. This is a great method to stop thieves with access to low-cost and easy-to-use equipment to steal or clone your car.
The Ghost can also be installed discretely (without doing any damage to your vehicle) and will only work when the proper pin sequence has been entered. It is only accessible to the owner, therefore nobody else will be able to use your vehicle unless they know your pin code. Some systems allow the proprietor to set up a valet mode or service mode, which permits the owner to let someone else use their vehicle without having to disclose their pin code. This protects them from opportunistic thefts.
The Ghost is not only easy to use and easy to dearm, it can also be linked to a car tracker so that you can track your vehicle. Certain insurance companies offer discounts on insurance for vehicles that have Ghosts installed. This is great news as it enhances the security of your vehicle.
Although the Ghost immobiliser is not Thatcham certified, it is an aftermarket item that has been independently tested and proved to be effective. If you are thinking of buying a used car that has the Ghost immobiliser, ask the seller if they're willing to transfer it to your new vehicle. This will make your new car more secure than if the previous owner hadn't transferred it.
No Circuit Cuts
The absence of circuit cuts means that in the event that your car is taken away, thieves will not be able to get it started. The thieves will need to know which buttons are used to unlock the vehicle, and they won't be able to do this without knowing the sequences. This will discourage them them from attempting to steal.
If you have an GPS tracking device installed and you are using the Ghost could function as an anti theft device. It can send a signal to activate a siren to warn the tracker about a theft attempt. This feature can be activated at any moment via your online dashboard.
When you connect your Ghost to the CAN data network, it will identify your vehicle and its owner by using the unique pin code that was programmed during installation. This enables the device to connect directly with the ECU of your vehicle and to stop the engine. This means that only the owner of the vehicle, or someone with the PIN code, is able to start the engine.
The pin code is difficult to decipher for criminals since it is created with buttons that can be easily accessed by the driver, for example stereo mute and cruise control. Your engineer will also provide you with an emergency Pin Code override card which is similar to scratch-off lottery tickets. It just needs to be scratched off to reveal the code and the instructions.
Your Ghost is not detectable using these methods, since it does not use circuit breakers or radio frequencies. This means that it is unaffected by modern techniques employed by organized criminal gangs that specialize in RF scanning and code-grabbing technology. It is a product that lasts for a lifetime that is easily removed from your vehicle when you sell it. This means that you won't lose any of the security that you have invested in.
No Key Fobs
In the UK, vehicle theft is increasing in the UK. The need for proactive measures to safeguard your precious cars from opportunistic criminals. The Autowatch Ghost Immobiliser is an innovative device that provides an effective defense against key hacking, cloning, and attacks on signals relay. It is a discreet and highly effective car safety system that is simple for anyone to install.
The Ghost immobiliser is not an ordinary system that relies on key fobs. It also does not use signals relays. This means it is not affected by signal interference and can't be activated by stolen or compromised remotes. It's also tamper-proof, and does not have any external wiring, making it hard to remove.
It safeguards you from key-long hacking, key theft and key-long by preventing your engine from starting until a unique PIN has been entered. This is done by using buttons already present on the vehicle, for example those on the steering wheel or doors.
This is the only way to start your engine and it will only work if you have entered the correct pin code. This makes it difficult for thieves who are opportunistic to steal your car. The system is designed to be easy to use. Alternatively, if you're worried about not remembering the pin code, the installer will provide you with an emergency override driver fob, which allows you to operate your car as usual.
The absence of key fobs or LED indicators also means that the Ghost immobiliser cannot be identified by the diagnostic equipment or RF scanners that are commonly used by thieves to identify the presence of a system. This stealth installation increases the effectiveness of the system and allows it to be installed in a location that is difficult to steal.
Ghost immobilisers are a low-cost and effective way to deter theft and improve the resale value of your car. Certain insurance companies acknowledge them and offer reduced rates.
No Damage
You can rest assured that your vehicle is secured from hacking and cloning as well as key-fob theft, as well as other common theft methods, if it's equipped with an immobiliser. This is especially crucial if you've invested a lot of money and time customising your vehicle or have an uncommon or expensive model. Ghost immobilisers operate silently and require no additional components or installation.
The system lets you create an individual pin code that needs to be entered to allow the engine to begin. It uses buttons on your steering wheel or console, or on the door panels. You can change the sequence at anytime. This means that even if someone knows your pin number they are not able to start your vehicle. The device can also be disabled in the service valet mode, so that you can take your car away for cleaning or servicing without having it activated.
This means that even if your vehicle is stolen or cloned, the criminal won't be capable of starting your car and will be caught in the act. The system also alerts you to any alteration to the wiring system in your vehicle for example, cutting or signal interception and will send the information to your phone and allow you to check that the security of your vehicle is in place at all times.
You might decide to turn off or remove the Ghost Immobiliser for reasons such as for maintenance or resale. In this scenario you'll need to be very careful to not cause damage to the wiring in your vehicle. It is strongly recommended that you wear safety gloves during this procedure, and also use a flashlight to illuminate dark areas of your vehicle where the immobiliser could be. You may also consult any documentation you might have, such as user manuals or installation instructions to determine the exact location of the device.
You can then reconnect the battery to your vehicle and test it to make sure that the immobiliser is operating correctly and all electrical components are working in the way you intended. You will need to use soldering or electrical tape to insulate any wires that have been cut. Make sure that there aren't any wires exposed and that any dangling cables are secured with zip ties or some other suitable method. Also, schedule a car inspection with a professional make sure that the removal process didn't cause damage to other systems within your car.